|
Turboflotor Blue 3000 - More skimming efficency with new style impeller. - Less power consumption (28 watts instead of 35 watts). - Higher air intake capacity (400 litres instead of 250 litres). - Ultrasound-welded – 100 % tight. The Turboflotor Blue 3000 is designed for installation in any mode: - as a “hang on”, it is simply hung over the edge of the aquarium. Only the venturi pump is inside the tank. - in the cabinet, it can be installed inside or outside the filter sump. At only 58 cm (c. 23 in) high, it is sized to fit nearly every standard aquarium cabinet. The high skimming capacity is guaranteed by the controlled water flow within the skimmer body and the patented conical riser within the foam cup The foam production is controlled by a simple one handed adjustment. The skimmer is driven by the powerful Ocean Runner venturi pump, with ceramic bearings for silent operation. The patented and time served Aqua Medic Needle Wheel ensures high air intake and optimum bubble size. The unit is manufactured using high quality acrylic. Height: 56 cm, (c. 22”) Footprint: 35 x 17 cm, (c. 14” x 7”) art.no.: 410.06 OceanProp 15000 l • 24 V DC, low voltage motor, including safety transformer. • Flow can be adjusted from 5.000 – 15.000 l/h (1300-4000 gph.). • Power uptake 9 – 20 watts, adjustable. • Silently designed innovative propeller. • New developed vacuum sucker for safe mounting inside the aquarium. art.-no.: 103.150 AT-Control SMS Module 1. Sending SMS: With the SMS module the AT-Control can send alarm SMS. The alarm is activated, e.g. if the actual measured values exceed or fall below programmed alarm values. The module can send an alarm SMS to a mobile telephone. All connected sensors can be used for the alarm function. The SMS shows the actual status of the sensor. Alarm of level sensors will indicate if the actual value exceeds or falls below the desired level, Redox or pH alarm will include the actual value of the redox or pH-probe. 2. Receiving SMS: SMS with any content can be sent to the SMS module and shown on the display of the controller. If an SMS with a preset code is sent to the AT-Control (e.g.: “info pH”) The AT-Control will send an SMS back with the actual value of the pH probe. (e.g.: pH = 8.23) To operate the SMS module, a working sim-card of a mobile phone company is needed. art.-no.: 78039 Gramma Front covers made of anodised aluminium - silver Cabinet finished in silver Overall dimensions: 68 x 62,5 x 133 cmm Filter: Protein skimmer Turboflotor I 400 and recirculation pump PF 1000 Luminaries: 2 pcs Sun Cover, each 2 x 24 W T5, black Art.-no.: 520.04 AT-Control Ethernet Interface With the Ethernet module, you can connect the AT-Control in a local LAN network directly with the Internet. Every computer, connected to the Internet can communicate with the AT-Control. The aquarist can control the actual values of all connected sensors and he can adjust the most important parameters via his web browser. It is as well possible to switch on and off the power sockets. Alarm notices can be sent by E-Mail to any E-Mail address. art.-no.: 78036 AT-Control Water Leakage Interface und Sensor To which aquarist this has´t happened yet? Water leaks, if directly from the aquarium or from external piping or the filter is blocked. Of course this happens when nobody is at home. The water leakage sensor is placed next to the aquarium or the filter sump. If he measures moisture, he gives an acoustic alarm. This alarm can be sent by the SMS module as SMS to any mobile telephone or the Ethernet module can send it as E-mail to any E-mail addresses. The aquarist is informed and can qickly resolve the problem. art.-no.: Water Leakage Interface art.-no.: Water Leakage Sensor AT-Control Active Hub The AT-Control Active Hub can be connected to the AT-Control in 2 different ways. 1. For enlargement of the Power Box. If more than 6 sensors or modules shall be connected to one power box, the 6 USB ports are not enough. With the Active Hub the possibilities are enlarged for 6 additional ports. 2. For operating the Controller without Power Box. If the AT-Control is used just for measuring and not for controlling, the controller can be directly connected to the Active Hub. Sensors can be connected via the active Hub as well. It is even possible to send the Data to a PC ( USB Interface) or send or receive alarm notes via SMS Module or Ethernet Module. The Active Hub is a special Accessory for the AT-Control Aquarium Computer system. It cannot be used for standard PC´s. On the other hand, standard USB hubs for PC cannot be used together with the AT Control. Both systems are not compatible. art.-no.: 78047 Anthias 160 Front covers made of anodised aluminium - silver Cabinet finished in walnut Overall dimensions: 153 x 69 x 146 cm Filter: Blue Reef 1000 incl. Protein skimmer Turboflotor Blue 3000 and recirculation pump Ocean Runner 3500 & complete plumbing Luminaries: Ocean Light plus 2 x 150 W + 2 x T5 54 W in silver Art.-no.: 531.05 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||