T5 Ocean Light

• 4, 6 or 8 T5 fluorescent lamps, controlled by 2 power cables.
• Blue LED lights for moonlight, with a separate power cable.
• The version with 6 and 8 T5 fluorescent lamps are equipped with
fans for active cooling.
• Long life ball bearing fans with 6 V low voltages.
• Two mounting options:
- Steel suspension cable
- Plastic holder for mounting the light on the aquarium frame
• Black colour, without fluorescent lamps.

art.-no.: 83842-1 Ocean Light T5 4 x 39 W
art.-no.: 83843-1 Ocean Light T5 4 x 54 W
art.-no.: 83862-1 Ocean Light T5 6 x 39 W
art.-no.: 83863-1 Ocean Light T5 6 x 54 W
art.-no.: 83882-1 Ocean Light T5 8 x 39 W
art.-no.: 83883-1 Ocean Light T5 8 x 54 W

arctic breeze

The complete construction is made from corrosion proof plastic and aluminium. The high-quality brushless motors running in ball bearings ensure longevity and silent running. The cooling power can be adjusted to the water temperature by the 12 V low voltage power sup-ply. Maximum capacity of the high-speed fans: 40.000 l/h (per fan) by very low power con-sumption.

Power supply: 230 V/50 Hz
Power consumption: 0,5 - 3 Watt(per fan)
Max. air power: 2-pack - 80.000 l/h
4-pack - 160.000 l/h
6-pack - 240.000 l/h
12 V low voltage by adjustable power pack

art.-no.: 107.102 arctic breeze 2-pack
art.-no.: 107.104 arctic breeze 4-pack
art.-no.: 107.106 arctic breeze 6-pack

Niveau-Set

Contains a canister with a volume of 25 litres with self aeration, check valve as well as the fully automatic re-filling unit SP 3000 Niveaumat for re-filling evaporated water in fresh and salt water aquariums. The Niveaumat consists a SP 3000 peristaltic pump incl. float switch.
Capacity: 3 l/h, power consumption 4,5 W.

art.-no.: 502.71

AT-Control SMS Module

Send and receive SMS from and to the AT-control-system.

1. Sending SMS:

With the SMS module the AT-Control can send alarm SMS. The alarm is activated, e.g. if the actual measured values exceed or fall below programmed alarm values. The module can send an alarm SMS to a mobile telephone. All connected sensors can be used for the alarm function. The SMS shows the actual status of the sensor. Alarm of level sensors will indicate if the actual value exceeds or falls below the desired level, Redox or pH alarm will include the actual value of the redox or pH-probe.

2. Receiving SMS:

SMS with any content can be sent to the SMS module and shown on the display of the controller. If an SMS with a preset code is sent to the AT-Control (e.g.: “info pH”)
The AT-Control will send an SMS back with the actual value of the pH probe. (e.g.: pH = 8.23)
To operate the SMS module, a working sim-card of a mobile phone company is needed.

art.-no.: 78039

AT-Control Ethernet Interface

Connecting the AT-Control to the Internet.

With the Ethernet module, you can connect the AT-Control in a local LAN network directly with the Internet. Every computer, connected to the Internet can communicate with the AT-Control. The aquarist can control the actual values of all connected sensors and he can adjust the most important parameters via his web browser. It is as well possible to switch on and off the power sockets.

Alarm notices can be sent by E-Mail to any E-Mail address.

art.-no.: 78036

AT-Control Water Leakage Interface und Sensor

Controlling and reporting water leakage.

To which aquarist this has´t happened yet? Water leaks, if directly from the aquarium or from external piping or the filter is blocked. Of course this happens when nobody is at home.

The water leakage sensor is placed next to the aquarium or the filter sump. If he measures moisture, he gives an acoustic alarm. This alarm can be sent by the SMS module as SMS to any mobile telephone or the Ethernet module can send it as E-mail to any E-mail addresses. The aquarist is informed and can qickly resolve the problem.

art.-no.: Water Leakage Interface
art.-no.: Water Leakage Sensor

AT-Control Active Hub

USB enlargement module, separate power supply for the controller.

The AT-Control Active Hub can be connected to the AT-Control in 2 different ways.

1. For enlargement of the Power Box. If more than 6 sensors or modules shall be connected to one power box, the 6 USB ports are not enough. With the Active Hub the possibilities are enlarged for 6 additional ports.

2. For operating the Controller without Power Box. If the AT-Control is used just for measuring and not for controlling, the controller can be directly connected to the Active Hub. Sensors can be connected via the active Hub as well. It is even possible to send the Data to a PC ( USB Interface) or send or receive alarm notes via SMS Module or Ethernet Module.

The Active Hub is a special Accessory for the AT-Control Aquarium Computer system. It cannot be used for standard PC´s. On the other hand, standard USB hubs for PC cannot be used together with the AT Control. Both systems are not compatible.

art.-no.: 78047